Rimfire · CIP · Not SAAMI standardized · CIP standardizedObsolete
5.6mm Flobert shot SC
5.6mm Flobert shot SC is a rimfire bottlenecked rimfire cartridge of Italy, Germany origin.
- Caliber
- 0.2256″ · 5.73 mm
- Introduced
- 1880
- Case
- Rimfire
- Primary use
- Target, Hunting
- Status
- Discontinued
- Obsolete
- Obsolete
- Introduced
- 1880
- Type
- Rimfire
- Origin
- Italy, Germany
- Inventor
- Louis-Nicolas Flobert system (approx: name-implied)
- Manufacturer
- Fiocchi; RWS
- Standard
- CIP · Not SAAMI standardized · CIP standardized
- SAAMI
- Not SAAMI standardized
- Obsolete
- Obsolete
- Status
- Discontinued
- Availability
- Rare
- Case capacity
- 6.2 gr H₂O
- Twist (typical)
- 1:15
- Primer
- Rimfire
- Case type
- Rimfire
- Max pressure
- 14,500 psi, CIP transducer
- Eff. range
- 100 yd
- Max range
- 500 yd
- Recoil
- 0.3–0.4 ft·lb
- Subsonic
- Capable
Ballistics
Velocity only, no drag model: no published ballistic coefficient is on file for 5.6mm Flobert shot SC, so this is the shape gravity alone gives the advertised velocity. Drag would steepen it. The tool below solves real loads through their published G1 or G7 model.
Open in Ballistic Compare- Parent case
- —
Representative trajectory — modeled from a single velocity input (no published BC for this cartridge yet).
Dimensionscase measurements · scale drawing · size vs familiar rounds
Case dimensions — the scale drawing at the top of the page is built from these.
CIP TDCC · verified| Measure | mm | in | ✓ |
|---|---|---|---|
| Bullet ⌀ | 5.73 | 0.226 | ✓ |
| Neck ⌀ | 5.35 | 0.211 | ✓ |
| Shoulder ⌀ | 5.72 | 0.225 | ✓ |
| Shoulder angle | 10.5° | — | ≈ |
| Base ⌀ | 5.74 | 0.226 | ✓ |
| Rim ⌀ | 7.06 | 0.278 | ✓ |
| Belt ⌀ | n/a | ||
| Rim thickness | 1.12 | 0.044 | ✓ |
| Neck length | 13.70 | 0.539 | ≈ |
| Case length | 22.30 | 0.878 | ✓ |
| Overall length | 22.10 | 0.870 | ✓ |
Size vs familiar rounds
Drawn at true 1:1 — every case is accurate relative to the others. Absolute size depends on your screen's pixel density, so measuring one against a real ruler may be off. 5.6mm Flobert shot SC is highlighted below.
Connected reference
History
The 5.6mm Flobert shot SC is a bottleneck rimfire rimfire cartridge originating in Italy, Germany.
FAQs
- What twist rate does 5.6mm Flobert shot SC use?
- 5.6mm Flobert shot SC typically uses a 1:15 twist rate.
- What bullet diameter is 5.6mm Flobert shot SC?
- 5.6mm Flobert shot SC uses a 0.2256″ (5.73 mm) diameter bullet.
- Is 5.6mm Flobert shot SC still in production?
- 5.6mm Flobert shot SC is discontinued; typical availability is rare.
- What is 5.6mm Flobert shot SC used for?
- 5.6mm Flobert shot SC is primarily used for target, hunting.
Sources & provenance
Data & sources. Specs compiled from the Lindcott Armory reference; the trajectory is modeled (point-mass), not measured. See methodology. Spotted an error? Report it →
