Shotgun · CIP
24 Gauge
The 24 gauge is a shotshell standardized by C.I.P.
- Caliber
- 0.5787″ · 14.7 mm
- Introduced
- 1880
- Case
- Rimmed
- Primary use
- Hunting
- Status
- Active
- Introduced
- 1880
- Type
- Shotgun
- Origin
- Europe (various)
- Manufacturer
- Fiocchi
- Standard
- CIP
- Status
- Active
- Availability
- Specialty
- Case capacity
- 159.2 gr H₂O
- Twist (typical)
- N/A (smoothbore)
- Primer
- 209 Shotshell
- Case type
- Rimmed
- Max pressure
- 12,038 psi, CIP transducer
- Eff. range
- 25 yd
- Max range
- 120 yd
- Recoil
- 10–16 ft·lb
- Subsonic
- Capable
Introduced by Fiocchi
Ballistics
Velocity only, no drag model: no published ballistic coefficient is on file for 24 Gauge, so this is the shape gravity alone gives the advertised velocity. Drag would steepen it. The tool below solves real loads through their published G1 or G7 model.
Open in Ballistic Compare- Parent case
- —
Representative trajectory — modeled from a single velocity input (no published BC for this cartridge yet).
Dimensionscase measurements · scale drawing · size vs familiar rounds
Case dimensions — the scale drawing at the top of the page is built from these.
CIP TDCC · approximate| Measure | mm | in | ✓ |
|---|---|---|---|
| Bullet ⌀ | 14.70 | 0.579 | ~ |
| Neck ⌀ | n/a | ||
| Shoulder ⌀ | n/a | ||
| Shoulder angle | n/a | ||
| Base ⌀ | 16.80 | 0.661 | |
| Rim ⌀ | 18.45 | 0.726 | ✓ |
| Belt ⌀ | n/a | ||
| Rim thickness | 1.55 | 0.061 | ✓ |
| Neck length | n/a | ||
| Case length | 69.80 | 2.748 | ✓ |
| Overall length | 63.14 | 2.486 | |
Size vs familiar rounds
Drawn at true 1:1 — every case is accurate relative to the others. Absolute size depends on your screen's pixel density, so measuring one against a real ruler may be off. 24 Gauge is highlighted below.
Missing a dimension for 24 Gauge? Some case measurements aren't in a published SAAMI/CIP drawing yet. Have a factory or reamer print? Send it → — verified hard-to-find data earns a free Lindcott sticker.
Reloading costestimate cost per round vs factory
Estimate your cost per round and how it compares to factory. Inputs are yours — nothing is stored.
Cost estimate only — not load data. Charge weight is your input; follow published manuals for safe charges.
Connected reference
History
The 24 Gauge is a shotshell rimmed shot cartridge of Europe (various) origin.
FAQs
- What twist rate does 24 Gauge use?
- 24 Gauge typically uses a N/A (smoothbore) twist rate.
- What bullet diameter is 24 Gauge?
- 24 Gauge uses a 0.5787″ (14.7 mm) diameter bullet.
- Is 24 Gauge still in production?
- 24 Gauge is active; typical availability is specialty.
- What is 24 Gauge used for?
- 24 Gauge is primarily used for hunting.
Sources & provenance
Data & sources. Specs compiled from the Lindcott Armory reference; the trajectory is modeled (point-mass), not measured. See methodology. Spotted an error? Report it →
