Rifle · CIP
8.5x63mmR
8.5x63mmR is a rimmed bottlenecked rifle cartridge of Germany origin.
- Caliber
- 0.3382″ · 8.59 mm
- Introduced
- 1985
- Case
- Rimmed
- Parent
- 8.5x63mm
- Primary use
- Hunting
- Status
- Active
- Introduced
- 1985
- Type
- Rifle
- Origin
- Germany
- Inventor
- Werner Reb
- Manufacturer
- Werner Reb
- Standard
- CIP
- Status
- Active
- Availability
- Limited
- Case capacity
- 74.1 gr H₂O
- Twist (typical)
- 1:10.0
- Primer
- Large Rifle Magnum
- Case type
- Rimmed
- Max pressure
- 55,114 psi, CIP transducer
- Eff. range
- 250 yd
- Max range
- 1250 yd
- Recoil
- 22.1 ft·lb
Ballistics
Velocity only, no drag model: no published ballistic coefficient is on file for 8.5x63mmR, so this is the shape gravity alone gives the advertised velocity. Drag would steepen it. The tool below solves real loads through their published G1 or G7 model.
Open in Ballistic Compare- Parent case
- 8.5x63mm
Representative trajectory — modeled from a single velocity input (no published BC for this cartridge yet).
Dimensionscase measurements · scale drawing · size vs familiar rounds
Case dimensions — the scale drawing at the top of the page is built from these.
CIP TDCC · verified| Measure | mm | in | ✓ |
|---|---|---|---|
| Bullet ⌀ | 8.59 | 0.338 | ✓ |
| Neck ⌀ | 9.33 | 0.367 | ✓ |
| Shoulder ⌀ | 11.47 | 0.452 | ✓ |
| Shoulder angle | 40.1° | — | ≈ |
| Base ⌀ | 11.91 | 0.469 | ✓ |
| Rim ⌀ | 13.32 | 0.524 | ✓ |
| Belt ⌀ | n/a | ||
| Rim thickness | 1.40 | 0.055 | ✓ |
| Neck length | 8.31 | 0.327 | ≈ |
| Case length | 63.00 | 2.480 | ✓ |
| Overall length | 84.00 | 3.307 | ✓ |
Size vs familiar rounds
Drawn at true 1:1 — every case is accurate relative to the others. Absolute size depends on your screen's pixel density, so measuring one against a real ruler may be off. 8.5x63mmR is highlighted below.
Reloading costestimate cost per round vs factory
Estimate your cost per round and how it compares to factory. Inputs are yours — nothing is stored.
Cost estimate only — not load data. Charge weight is your input; follow published manuals for safe charges.
Lineage
Connected reference
History
derived from the 8.5x63mm.
FAQs
- What twist rate does 8.5x63mmR use?
- 8.5x63mmR typically uses a 1:10.0 twist rate.
- What bullet diameter is 8.5x63mmR?
- 8.5x63mmR uses a 0.3382″ (8.59 mm) diameter bullet.
- Is 8.5x63mmR still in production?
- 8.5x63mmR is active; typical availability is limited.
- What is 8.5x63mmR used for?
- 8.5x63mmR is primarily used for hunting.
- What is 8.5x63mmR based on?
- 8.5x63mmR is derived from the 8.5x63mm case.
Sources & provenance
Data & sources. Specs compiled from the Lindcott Armory reference; the trajectory is modeled (point-mass), not measured. See methodology. Spotted an error? Report it →
