Rifle · CIP · Not SAAMI standardized · CIP standardizedObsolete
8x60mmRS
8x60mmRS is a rimmed bottlenecked rifle cartridge of Germany origin.
- Caliber
- 0.3236″ · 8.22 mm
- Introduced
- 1919
- Case
- Rimmed
- Parent
- 8x57 JRS
- Primary use
- Hunting
- Status
- Discontinued
- Obsolete
- Obsolete
- Introduced
- 1919
- Type
- Rifle
- Origin
- Germany
- Inventor
- Mauser
- Manufacturer
- Mauser
- Standard
- CIP · Not SAAMI standardized · CIP standardized
- SAAMI
- Not SAAMI standardized
- Obsolete
- Obsolete
- Status
- Discontinued
- Availability
- Rare
- Case capacity
- 66.3 gr H₂O
- Twist (typical)
- 1:9.4
- Primer
- Large Rifle
- Case type
- Rimmed
- Max pressure
- 49,313 psi, CIP transducer
- Eff. range
- 250 yd
- Max range
- 1250 yd
- Recoil
- 20.1–21.1 ft·lb
Introduced by Mauser
Ballistics
Velocity only, no drag model: no published ballistic coefficient is on file for 8x60mmRS, so this is the shape gravity alone gives the advertised velocity. Drag would steepen it. The tool below solves real loads through their published G1 or G7 model.
Open in Ballistic Compare- Parent case
- 8x57 JRS
Representative trajectory — modeled from a single velocity input (no published BC for this cartridge yet).
Dimensionscase measurements · scale drawing · size vs familiar rounds
Case dimensions — the scale drawing at the top of the page is built from these.
CIP TDCC · verified| Measure | mm | in | ✓ |
|---|---|---|---|
| Bullet ⌀ | 8.22 | 0.324 | ✓ |
| Neck ⌀ | 9.08 | 0.357 | ✓ |
| Shoulder ⌀ | 10.95 | 0.431 | ✓ |
| Shoulder angle | 19.1° | — | ≈ |
| Base ⌀ | 12.03 | 0.474 | ✓ |
| Rim ⌀ | 13.40 | 0.528 | ✓ |
| Belt ⌀ | n/a | ||
| Rim thickness | 1.40 | 0.055 | ✓ |
| Neck length | 9.08 | 0.357 | ≈ |
| Case length | 60.00 | 2.362 | ✓ |
| Overall length | 83.60 | 3.291 | ✓ |
Size vs familiar rounds
Drawn at true 1:1 — every case is accurate relative to the others. Absolute size depends on your screen's pixel density, so measuring one against a real ruler may be off. 8x60mmRS is highlighted below.
Reloading costestimate cost per round vs factory
Estimate your cost per round and how it compares to factory. Inputs are yours — nothing is stored.
Cost estimate only — not load data. Charge weight is your input; follow published manuals for safe charges.
Lineage
Connected reference
History
derived from the 8x60mm S.
FAQs
- What twist rate does 8x60mmRS use?
- 8x60mmRS typically uses a 1:9.4 twist rate.
- What bullet diameter is 8x60mmRS?
- 8x60mmRS uses a 0.3236″ (8.22 mm) diameter bullet.
- Is 8x60mmRS still in production?
- 8x60mmRS is discontinued; typical availability is rare.
- What is 8x60mmRS used for?
- 8x60mmRS is primarily used for hunting.
- What is 8x60mmRS based on?
- 8x60mmRS is derived from the 8x57 JRS case.
Sources & provenance
Data & sources. Specs compiled from the Lindcott Armory reference; the trajectory is modeled (point-mass), not measured. See methodology. Spotted an error? Report it →
