Rifle · CIP
8x60mm S
The 8x60mm S is a bottleneck rimless rifle cartridge originating in Germany, introduced in 1928..
- Caliber
- 0.3236″ · 8.22 mm
- Introduced
- 1928
- Case
- Rimless
- Parent
- 7.92x57mm Mauser
- Primary use
- Hunting
- Status
- Discontinued
- Introduced
- 1928
- Type
- Rifle
- Origin
- Germany
- Inventor
- Mauser
- Manufacturer
- Mauser
- Standard
- CIP
- Status
- Discontinued
- Availability
- Rare
- Case capacity
- 67 gr H₂O
- Twist (typical)
- 1:9.4
- Primer
- Large Rifle
- Case type
- Rimless
- Max pressure
- 58,740 psi, CIP transducer
- Eff. range
- 300 yd
- Max range
- 1500 yd
- Recoil
- 19.2–22 ft·lb
Introduced by Mauser
Ballistics
Velocity only, no drag model: no published ballistic coefficient is on file for 8x60mm S, so this is the shape gravity alone gives the advertised velocity. Drag would steepen it. The tool below solves real loads through their published G1 or G7 model.
Open in Ballistic Compare- Parent case
- 7.92x57mm Mauser
Representative trajectory — modeled from a single velocity input (no published BC for this cartridge yet).
Dimensionscase measurements · scale drawing · size vs familiar rounds
Case dimensions — the scale drawing at the top of the page is built from these.
CIP TDCC| Measure | mm | in | ✓ |
|---|---|---|---|
| Bullet ⌀ | 8.22 | 0.324 | |
| Neck ⌀ | 9.08 | 0.357 | |
| Shoulder ⌀ | 10.95 | 0.431 | |
| Shoulder angle | 15.8° | — | |
| Base ⌀ | 11.98 | 0.472 | |
| Rim ⌀ | 11.95 | 0.470 | |
| Belt ⌀ | — | — | |
| Rim thickness | 1.30 | 0.051 | |
| Neck length | 8.49 | 0.334 | |
| Case length | 60.00 | 2.362 | |
| Overall length | 83.60 | 3.291 |
Size vs familiar rounds
Drawn at true 1:1 — every case is accurate relative to the others. Absolute size depends on your screen's pixel density, so measuring one against a real ruler may be off. 8x60mm S is highlighted below.
Reloading costestimate cost per round vs factory
Estimate your cost per round and how it compares to factory. Inputs are yours — nothing is stored.
Cost estimate only — not load data. Charge weight is your input; follow published manuals for safe charges.
Lineage
Connected reference
History
The 8x60mm S was introduced in 1928, based on the 7.92x57mm Mauser case (Germany).
FAQs
- What twist rate does 8x60mm S use?
- 8x60mm S typically uses a 1:9.4 twist rate.
- What bullet diameter is 8x60mm S?
- 8x60mm S uses a 0.3236″ (8.22 mm) diameter bullet.
- Is 8x60mm S still in production?
- 8x60mm S is discontinued; typical availability is rare.
- What is 8x60mm S used for?
- 8x60mm S is primarily used for hunting.
- What is 8x60mm S based on?
- 8x60mm S is derived from the 7.92x57mm Mauser case.
Sources & provenance
Data & sources. Specs compiled from the Lindcott Armory reference; the trajectory is modeled (point-mass), not measured. See methodology. Spotted an error? Report it →
