Rifle · CIP · Not SAAMI standardized · CIP standardizedObsolete
9x57mmR
9x57mmR is a rimmed bottlenecked rifle cartridge of Germany origin.
- Caliber
- 0.3575″ · 9.08 mm
- Introduced
- 1890
- Case
- Rimmed
- Parent
- 9x57mm Mauser
- Primary use
- Hunting
- Status
- Discontinued
- Obsolete
- Obsolete
- Introduced
- 1890
- Type
- Rifle
- Origin
- Germany
- Inventor
- Mauser
- Manufacturer
- Mauser
- Standard
- CIP · Not SAAMI standardized · CIP standardized
- SAAMI
- Not SAAMI standardized
- Obsolete
- Obsolete
- Status
- Discontinued
- Availability
- Rare
- Case capacity
- 63.7 gr H₂O
- Twist (typical)
- 1:14.2
- Primer
- Large Rifle
- Case type
- Rimmed
- Max pressure
- 40,611 psi, CIP transducer
- Eff. range
- 250 yd
- Max range
- 1250 yd
- Recoil
- 17.5–20.5 ft·lb
Introduced by Mauser
Ballistics
Velocity only, no drag model: no published ballistic coefficient is on file for 9x57mmR, so this is the shape gravity alone gives the advertised velocity. Drag would steepen it. The tool below solves real loads through their published G1 or G7 model.
Open in Ballistic Compare- Parent case
- 9x57mm Mauser
Representative trajectory — modeled from a single velocity input (no published BC for this cartridge yet).
Dimensionscase measurements · scale drawing · size vs familiar rounds
Case dimensions — the scale drawing at the top of the page is built from these.
CIP TDCC · verified| Measure | mm | in | ✓ |
|---|---|---|---|
| Bullet ⌀ | 9.08 | 0.357 | ✓ |
| Neck ⌀ | 9.83 | 0.387 | ✓ |
| Shoulder ⌀ | 10.95 | 0.431 | ✓ |
| Shoulder angle | 19.1° | — | ≈ |
| Base ⌀ | 11.96 | 0.471 | ✓ |
| Rim ⌀ | 13.40 | 0.528 | ✓ |
| Belt ⌀ | n/a | ||
| Rim thickness | 1.40 | 0.055 | ✓ |
| Neck length | 9.04 | 0.356 | ≈ |
| Case length | 56.80 | 2.236 | ✓ |
| Overall length | 81.00 | 3.189 | ✓ |
Size vs familiar rounds
Drawn at true 1:1 — every case is accurate relative to the others. Absolute size depends on your screen's pixel density, so measuring one against a real ruler may be off. 9x57mmR is highlighted below.
Reloading costestimate cost per round vs factory
Estimate your cost per round and how it compares to factory. Inputs are yours — nothing is stored.
Cost estimate only — not load data. Charge weight is your input; follow published manuals for safe charges.
Lineage
Connected reference
History
derived from the 9x57mm Mauser.
FAQs
- What twist rate does 9x57mmR use?
- 9x57mmR typically uses a 1:14.2 twist rate.
- What bullet diameter is 9x57mmR?
- 9x57mmR uses a 0.3575″ (9.08 mm) diameter bullet.
- Is 9x57mmR still in production?
- 9x57mmR is discontinued; typical availability is rare.
- What is 9x57mmR used for?
- 9x57mmR is primarily used for hunting.
- What is 9x57mmR based on?
- 9x57mmR is derived from the 9x57mm Mauser case.
Sources & provenance
Data & sources. Specs compiled from the Lindcott Armory reference; the trajectory is modeled (point-mass), not measured. See methodology. Spotted an error? Report it →
