Hodgdon Powder Company · Extruded
H4831SC
Short-Cut version of H4831 with shorter kernels for improved metering through powder measures.
- Manufacturer
- Hodgdon
- Grain shape
- Extruded
- Burn rank
- #69
- Category
- Rifle Slow
- Temp sensitivity
- Low
- Application
- Magnum Rifle
- Origin
- USA
- Status
- Active
Burn-rate position
Typical cartridges
.300 Winchester Magnum, .338 Winchester Magnum, .30-06 Springfield, 7mm Remington Magnum, .270 Winchester
Substitutes
Listed substitutions with charge guidance. Always start at published minimums and work up.
SC is spherical-cut version of H4831 — charge weights are the same.
ADI-based; similar burn rate to H4831SC. Start low and work up.
Similar burn rate in magnum rifle cartridges; reduce 3–5% when substituting.
Temperature-stable alternative to H4831SC; similar charge weights in magnum rifle cartridges.
Close to H4831SC in large rifle cartridges. Standard workup required.
Similar burn rate for .30-06, .270 Win, and similar cartridges. Work up from starting data.
Similar burn rate in magnum rifle cartridges. Work up from starting data.
Equivalent formulation. Cross-referenced in Australian loading manuals. Work up from minimum.
By cartridge
Similar burn rate
Supply & handling
- Availability (US)
- Common
- Shortage-prone
- No
- Suppressor-friendly
- Yes
- Flash-suppressed
- No
About this powder
H4831SC is the short-cut version of H4831, with grain length reduced to improve flow through powder measures and reduce bridging. For reloaders using progressive presses or who load large volumes, SC is generally preferred over standard H4831. Performance is identical to H4831.
Sources & provenance
- Manufacturer Hodgdon — Hodgdon — published load/burn-rate data