ADI · Extruded
AR 2213SC
Short-cut formulation equivalent to Hodgdon H4831SC.
- Manufacturer
- ADI
- Grain shape
- Extruded
- Burn rank
- #70
- Category
- Medium-Slow
- Temp sensitivity
- Low
- Application
- Rifle
- Origin
- Australia
- Status
- Active
Burn-rate position
FastestSlowest
Typical cartridges
7mm SAUM, 7mm WSM, .300 Winchester Magnum, .338 Winchester Magnum, .30-06 Springfield, 7mm Remington Magnum, .300 WSM
Substitutes
Listed substitutions with charge guidance. Always start at published minimums and work up.
H4831SC · Hodgdon Published
Equivalent formulation. Cross-referenced in Australian loading manuals. Work up from minimum.
By cartridge
7mm SAUM also used: Reloader 19, H4831, IMR 4831
7mm WSM also used: N550, Reloader 17, N560
.300 Winchester Magnum also used: N550, Superperformance, N555
.338 Winchester Magnum also used: N550, 203-B, N540
.30-06 Springfield also used: N110, Winchester 748, N530
7mm Remington Magnum also used: Superperformance, D072.5, IMR 4320
.300 WSM also used: N550, N555, Alliant Reloader 16
Similar burn rate
Supply & handling
- Availability (US)
- Moderate
- Shortage-prone
- No
- Suppressor-friendly
- Yes
- Flash-suppressed
- No
About this powder
ADI AR 2213SC is the source powder for Hodgdon H4831SC. The SC (short-cut) designation means improved metering from powder measures. Standard for Australian magnum hunting loads in 7mm Rem Mag, .300 Win Mag, and .338 Win Mag.
Sources & provenance
- Manufacturer ADI — ADI — published load/burn-rate data